In short. Reddy Generators rents generators from its own fleet, supplies new and used sets, and provides service, AMC and spares in Kakinada, about 480 km from Hyderabad by road. The company has already supplied generator rental to an offshore pipeline contractor at Kakinada, and that is the kind of work this page is written for: project and plant power that must run around the clock on a salty, cyclone-prone coast, with fuel, logistics and handover planned before the set leaves Hyderabad. Below is a worked fuel and refuelling example for a 24-hour contractor yard and a mobilisation checklist for project rentals.
Who this page is for: For project managers, contractors and plant engineers at Kakinada’s ports, offshore oil and gas bases, fabrication yards, seafood and aqua processing plants, fertiliser and SEZ sites who need generator power for a project or a plant, planned around salt air, cyclones and long distances.
Key facts
- Kakinada is about 480 km from Hyderabad by road. Rental mobilisation, deliveries and service visits are planned in advance; timing is confirmed when you call.
- Power distribution: APEPDCL, the eastern distribution company.
- Kakinada has an anchorage port and a deep-water port; Hope Island, a sand spit offshore, shelters the harbour. A further port is being developed in the Kakinada SEZ.
- The city is the onshore base for offshore oil and gas operations in the Krishna–Godavari basin, with a gas terminal at Gadimoga about 25 km away and a long-distance gas pipeline to Gujarat. Fertiliser, edible-oil refining and seafood export are major industries.
- Climate is hot and humid: late May to early June regularly passes 40 °C, humidity peaks around September, and cyclones are frequent. Severe cyclonic storm Montha crossed the coast close to Narsapur, south of Kakinada, around midnight on 28–29 October 2025, with winds gusting to about 110 km/h.
Kakinada’s conditions as generator decisions
| Condition | Effect on the set | Decision for project and plant power |
|---|---|---|
| Port and offshore-base environment: salt spray, wet air | Rapid corrosion of enclosures, radiators, fasteners and terminals; tracking on alternator windings; controller faults from moisture | Choose enclosures and radiators suited to coastal duty, use anti-condensation heaters, and include salt cleaning and insulation tests in the service schedule — monthly for sets on the waterfront. |
| Projects that run 24 hours a day | The set works at prime duty, not standby; fuel use and service intervals by running hours dominate | Rent or buy a set rated for prime duty at your average and peak load; plan oil changes by hours, not by calendar. |
| Frequent cyclones; Montha in October 2025 | Grid outages across coastal districts; transport and fuel supply disrupted; temporary sets exposed to wind and water | Anchor rental sets and fuel tanks; raise them above local water levels; keep several days of diesel on site in the cyclone season (October to December). |
| Hot, humid summers above 40 °C | Derating and high coolant temperature under heavy load | Size with summer derating; give canopies clear airflow on yards crowded with containers and pipe stacks. |
| Hazardous areas around gas, fuel and process plant | An ordinary generator is an ignition source | The site’s safety team defines hazardous zones; the generator, its exhaust and fuel tank must sit outside them unless the equipment is specifically certified. We follow the site’s permit-to-work system. |
| Long distance from Hyderabad | A forgotten cable, lug or fuse costs days | Use the mobilisation checklist below so everything travels with the set the first time. |
Kakinada sites and the generators they use
Illustrative ranges. Actual sizes come from your load list and duty.
| Site | Typical set size | Duty | What matters most |
|---|---|---|---|
| Offshore pipeline and marine contractors’ yards | 62.5–320 kVA, often more than one | Prime, 24 hours, for months | Welding and coating equipment, workshop cranes, site offices and lighting; fuel control; salt |
| Port berths, warehouses and bulk handling | 62.5–500 kVA | Standby or prime | Conveyor and crane motors; reefer points; flood-proof plinths |
| Seafood and aqua processing plants, ice plants | 125–750 kVA | Critical standby | Freezers, IQF and blast-freezing compressors, ice-plant motors; starting kVA; product loss in outages |
| Shrimp hatcheries and aqua farms around the district | 15–125 kVA | Standby, sometimes prime | Aerators and pumps cannot stop for long; small sets in exposed outdoor locations |
| Fertiliser, edible-oil and process plants | Large multi-set plants; 250–2,000 kVA sets | Emergency and essential services | Safe shutdown loads, control systems, fire pumps; hazardous zones |
| SEZ units and new industrial projects | 62.5–500 kVA during construction | Prime for construction, then standby | Rental during construction, purchase for the permanent plant |
| Hospitals, offices and apartments in the city | 30–500 kVA | Standby | AMF transfer; long runs after cyclones |
Confirmed work at Kakinada: offshore pipeline contractor rental
Reddy Generators has supplied generators on rent to an offshore pipeline contractor at Kakinada. Work of this kind involves sets travelling from Hyderabad, running at prime duty at a coastal yard, and being serviced and refuelled to a plan for the length of the contract. The project is described on our offshore pipeline contractor generator rental page.
Worked example (illustrative): fuel and refuelling for a 24-hour contractor yard
Illustrative case. A marine contractor’s fabrication yard at Kakinada rents a 200 kVA set (160 kW at 0.8 power factor) for a four-month contract. Assume an average load of about 110 kW around the clock, with peaks near 150 kW when several welding machines and the workshop crane run together.
- Loading: average 110 ÷ 160 ≈ 69 %; peak 150 ÷ 160 ≈ 94 %. The average is well placed for prime running; the peaks are short and within the set’s prime rating, but leave little margin in May heat. If the yard expects more welding sets, a 250 kVA set is the safer choice.
- Fuel rate: with an illustrative 0.28 litres per kWh at this loading, 110 × 0.28 ≈ 30.8 litres per hour.
- Daily and weekly fuel: 30.8 × 24 ≈ 739 litres per day, or about 5,170 litres per week.
- Refuelling interval: if the set’s own tank provides about 400 litres usable, it lasts 400 ÷ 30.8 ≈ 13 hours — two refuellings every day, including one at night. Adding a 2,000-litre bulk tank with a transfer arrangement stretches this to 2,000 ÷ 739 ≈ 2.7 days between tanker deliveries.
- Service by hours: 24-hour running accumulates about 720 hours a month. If the engine maker’s oil-change interval is, for example, 250 hours, the set needs roughly three oil-and-filter services a month, scheduled with the yard in advance.
- Cyclone allowance: in October to December, keep at least three days’ fuel (about 2,200 litres at this load) on site, because tankers and service visits may be held up after a storm.
Fuel accounting matters on long project rentals: a log of litres delivered against hour-meter readings and kWh shows quickly if consumption rises without a matching load. See our fuel theft and refuelling control guide.
Aqua farms, hatcheries and processing plants
Outside the port, much of the Kakinada region’s generator demand comes from aquaculture. Aerators and water pumps on shrimp ponds and in hatcheries cannot stop for long without risk to the stock, and processing plants and ice plants hold product that spoils if freezers lose temperature. For these sites the priorities differ from a contractor’s yard: the set is a standby, it must start automatically through an AMF panel when the grid fails, and it must handle the starting current of several aerator or compressor motors coming back at once. Staggering the restart, and keeping the set’s battery, charger and fuel in good order through the long idle periods, is what makes it reliable on the night it is needed. Outdoor sets on pond bunds also need the same salt and moisture protection as those on the waterfront.
How rental, sales, service and spares work for Kakinada
Project rental
Rental sets come from Reddy Generators’ own fleet in Hyderabad and are mobilised by road. For project work we agree, before dispatch: the set size and number of sets, cable lengths and distribution, who supplies diesel, the refuelling arrangement, service intervals by running hours, site access and permit requirements, and the demobilisation date. Timing of each visit is confirmed with the site.
New sets
For permanent plants, Reddy Generators supplies new CPCB IV+ sets through supply tie-ups with all major makes, with AMF panels and changeover arrangements. For Kakinada we specify coastal protection of the enclosure, radiator and alternator at the quotation stage.
Service, AMC and repairs
Service visits and AMC schedules are planned from Hyderabad around running hours and the cyclone season. Overhauls, alternator rewinding, fuel injection work, AVR and controller repairs are done on site or at the Hyderabad workshop. Reddy Generators has carried out project-based service work beyond its home states, in Odisha and Assam.
Spares and used sets
Filters, belts, batteries and service parts for all major makes are supplied from Hyderabad; for 24-hour project sets, a stock of filters and oil for at least one service should stay on site. Used and refurbished sets from 15 to 2,000 kVA are load-bank tested before sale; refurbished sets carry a six-month warranty (exclusions apply), and used as-is sets come with an inspection report.
Project rental mobilisation and handover checklist
Before dispatch from Hyderabad
- Load list with average and peak kW, largest motor or welding load, and duty hours per day.
- Set size and quantity agreed; prime rating confirmed against the duty.
- Cable sizes and lengths, lugs, glands and the distribution board agreed; who supplies them is written down.
- Earthing arrangement at the yard agreed with the site electrical in-charge.
- Diesel responsibility, bulk tank size and refuelling method agreed.
- Site entry: gate passes, vehicle permits, induction, permit-to-work, and the name of the site contact.
- Unloading method and position of the set, outside any hazardous area, on firm level ground above water level.
At handover on site
- Set anchored; spill tray and fire extinguishers in place.
- Earthing tested; insulation resistance of cables tested; phase rotation checked.
- Load test on real site load; readings of voltage, frequency, current, oil pressure and coolant temperature recorded.
- Hour-meter and fuel level recorded jointly; log book handed over.
- Site operators shown how to start, stop, read alarms and do daily checks.
- Service dates by running hours fixed; spares and oil for the first service left on site.
Every day, by the site operator
| Daily check | Reading | Initials |
|---|---|---|
| Date and hour-meter reading | ||
| Fuel level / litres received | ||
| Average kW or amps at mid-shift | ||
| Oil pressure and coolant temperature | ||
| Alarms or trips, and action taken | ||
| Salt deposits or water seen in canopy? |
At demobilisation
- Final hour-meter and fuel level recorded jointly.
- Cables disconnected and made safe by the licensed electrician before the set is moved.
- Set inspected for damage, and the site restored around the plinth.
Common mistakes
- Renting a standby-rated set for a project that will run it 24 hours a day at high load.
- Relying on the set’s own fuel tank on a round-the-clock job, so the yard must refuel twice a day and stops when the night refuelling is missed.
- Sending a set 480 km without agreeing cables, lugs, earthing and the distribution board, then losing days waiting for a missing item.
- Placing the generator or its fuel tank inside a hazardous area or where a storm surge or flood can reach it.
What to send us
Send the site location in or around Kakinada, the type of project or plant, the load list with average and peak kW and the largest motor or welding load, hours of running per day, the rental period or whether you want to buy, the cable distance from set to distribution board, who will supply diesel, site entry and permit requirements, and the name of the site contact. Photos of the proposed set location help us plan mobilisation. Use the Generator rental enquiry, or WhatsApp the details and photographs.
Questions customers in Kakinada ask
Do you give generators on rent in Kakinada?
Yes. Reddy Generators rents generators from its own fleet in Hyderabad to sites in Kakinada and has already supplied rental sets to an offshore pipeline contractor there. Mobilisation is planned in advance and timing is confirmed when you call.
Can your rental generators run 24 hours a day for a project?
Yes, when the set is chosen for prime duty at your average and peak load and serviced by running hours. A set running round the clock builds up about 720 hours a month, so oil and filter services are scheduled with the site in advance.
How much diesel will a 200 kVA generator use at a yard in Kakinada?
At an average of about 110 kW it uses roughly 31 litres an hour, about 740 litres a day. The actual figure depends on your load; our worked example on this page shows the method.
Do you supply new generators in Kakinada?
Yes. New CPCB IV+ diesel generators of all major makes are supplied through supply tie-ups, with AMF panels, changeover arrangements and installation planned from Hyderabad.
Can you service generators in Kakinada?
Yes. We schedule planned service, AMC visits and repairs from Hyderabad for all major makes, and supply spare parts. For coastal sets, service includes salt cleaning and insulation tests.
Can a generator be placed near gas or fuel facilities?
Only outside the hazardous areas defined by the site’s safety team, unless the equipment is specifically certified for that zone. The exhaust and fuel tank must also be positioned to the site layout and permits.
Do you have used generators for aqua farms or processing plants in Kakinada?
Yes. Used and refurbished sets from 15 to 2,000 kVA are load-bank tested before sale; refurbished sets carry a six-month warranty with stated exclusions, and used as-is sets come with an inspection report.
Related pages
- Offshore Pipeline Contractor Rental, Kakinada
- Upstream Oil & Gas Power
- Ports & Marine
- Food & Seafood Processing Power
- Construction Rental Power
- Rental Fuel Tanks
- Fuel Theft & Refuelling Control
- 125 kVA Silent DG for an Onshore Oil & Gas Terminal, Gadimoga
Technical content reviewed by D. Srinivas Reddy, Managing Partner and service engineer. Last updated 3 November 2026.